Bosch gas 25 vacuum cleaner hose connector 40mm 3D 打印模型

$7.50
牌照:
Bosch gas 25 vacuum cleaner hose connector 40mm 3D 打印模型
$ 7.50
删除 添加到书签
  • 集合:
    No
  • 以毫米为单位的宽度:
    78
  • 以毫米为单位的高度:
    85
  • 以毫米为单位的深度:
    78
  • 打印准备:
    No
  • 3D扫描:
    No
  • 成人内容:
    No
  • PBR:
    No
  • 日期:
    8535
  • 日期:
  • 项目 ID:
    346670
  • 评分:
报告这一项目
with this part you can connect a hose with an inner diameter of 40mm to a bosch gas 25 vacuum cleaner. the twist lock is identical to the original hose connection. the max. outer diameter of the hose is 48mm.
the inner diameter of the connection to the vac is 64mm. please check if the connector of your vac is a little bit smaller, about 63,8mm. if not it will not fit or you need to grind the inner diameter! 打印准备: 否
需要更多的格式吗?
如果你需要一个不同的格式，请打开一个新的支持票和为此请求。我们可以转换到 3D 模型: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 我们不转换 3d 场景 以及 .step、.iges、.stp、.sldprt 等格式。!

下载 Bosch gas 25 vacuum cleaner hose connector 40mm 3D 打印模型 stl max 从 destagge

hose connector bosch gas 25 vacuum cleaner workshop dust extraction suction connection
没有对这一项目的评论。

相关的项目 从 Bosch gas 25 vacuum cleaner hose connector 40mm

boba fett rotj gauntlet hose connector 3d print model 3D 打印模型
marine boat thru hull fitting connector 1 inch hose neck12 3d-print 3D 打印模型
Printed Airliner 21 3D 打印模型
marine boat thru hull fitting connector neck12 3d-print 3D 打印模型
FURNITURE CONNECTOR SET 3D 打印模型
fan cooler for melzi board 40mm fan 3D 打印模型
diy longboard paddle stick 3D 打印模型
JLG17PDW G17 PDW KIT 3D 打印模型
bicycle motorcycles handlebar plugs clips 22mm v02 knobs 3d-print cn 3D 打印模型
bicycle motorcycles handlebar plugs clips 22mm v01 knobs 3d-print 3D 打印模型