geeetech a10 3d printer direct drive mount 3D 打印模型

convert your geeetech a10 from a bowden to a direct drive. this housing is designed with two side cooling fans and one front nozzle cooling fan for enhanced cooling onto the hot end. relocate the stepper motor to create a direct drive for material such as flexibles. designed to use the rail mount for mounting to the printer. this design will require a small metal plate for mounting hot ends. holes are pre-determined for over head mounting for the adapter plate needed.

all wires are to be ran through the back of the housing and thru the top to keep away from the rail and wheels.

rewiring is a must along with extending a few wires, but very easy to do. these wires are for the run out sensor and drive motor.

remember to adjust your offset.

this will allow you to print flexible filaments and have better control while printing with your a10.

contact me for any questions that you may have regarding. willing to make more mount styles for any other projects that you may have. gregdezman@hotmail.com
geeetech.