Panda Oil PaintingHueforge Painting 免费 3D 打印模型

This model is a Hueforge 3D Printing Painting that required a multi-color 3D-printer to print it.

The 3D printer filament I recommend is PLA. If you want to make this Painting by yourself, you can also buy the filaments Hueforge combo on Sunlu official website.

3D Printing Setting:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Sunlu PLA+ Black Transmission Distance: 0.6
PLA Sunlu PLA Grass Green Transmission Distance: 2.5
PLA Sunlu PLA+ Green Transmission Distance: 10
PLA Sunlu PLA+ Pure Yellow Transmission Distance: 5
PLA Sunlu PLA+ White Transmission Distance: 6

Swap Instructions:
Black until layer #6 at 0.56mm
Grass Green until layer #7 at 0.64mm
Green until layer #8 at 0.72mm
Pure Yellow until layer #10 at 0.88mm
White for the rest. 打印准备: 否