English
Español
Deutsch
日本語
Polska
Français
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदी
- 可用的格式: Stereolithography: stl 851.84 kb
- 集合:No
- 打印准备:No
- 3D扫描:No
- 成人内容:No
- PBR:No
- 日期:2511
- 日期: 2020-01-28
- 项目 ID:272820
- 评分:
after downloading and printing the"
punished props academy" ros light-saber i found it to light and easy breakable, so i redesigned it from scratch so that its now more stronger. if you put electronics inside, just drill out the hole in the center piece of the saber to put in a on/off switch of your choice.
3d printing settings
body's printed 0.3
all smaller parts 0.2
most parts at 100% infill
some parts need easy to remove supports 打印准备: 否
阅读更多punished props academy" ros light-saber i found it to light and easy breakable, so i redesigned it from scratch so that its now more stronger. if you put electronics inside, just drill out the hole in the center piece of the saber to put in a on/off switch of your choice.
3d printing settings
body's printed 0.3
all smaller parts 0.2
most parts at 100% infill
some parts need easy to remove supports 打印准备: 否
需要更多的格式吗?
如果你需要一个不同的格式，请打开一个新的支持票和为此请求。我们可以转换到 3D 模型: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 我们不转换 3d 场景 以及 .step、.iges、.stp、.sldprt 等格式。!
如果你需要一个不同的格式，请打开一个新的支持票和为此请求。我们可以转换到 3D 模型: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 我们不转换 3d 场景 以及 .step、.iges、.stp、.sldprt 等格式。!
下载 star wars ros sky-walker light saber 3D 打印模型 stl 从 RikkieBkk
starwars luke skywalker lightsaber没有对这一项目的评论。
相关的项目 从 star wars ros sky-walker light saber
-10%
stl
3dscanverse
Sci-Fi
