Ukrainian UAV GOR Tactical military reconnaissance drone 3D 模型

During the Russian invasion of Ukraine, the use of drones became paramount.
Fighting the aggressor, Ukraine develops and manufactures its own drones.
“GOR” - Unmanned Aerial System of the Ukrainian company “Airlogix” - is a ready-made
solution for performing reconnaissance and surveillance tasks. The UAV is equipped with
a camera with thermal imager and encrypted communication. The aircraft has a modular design:
it consists of six parts, assembly of the airframe takes 30 seconds. Deployment of the complex takes 10 minutes.
The GOR communications complex has been tested in combat conditions and has shown resistance to electronic warfare.
Video and telemetry is transmitted encrypted. Developed and tested at the front in 2022.
Certified and accepted into service, mass produced and engaged in combat since 2023.

• Length/span - 1.6 m / 2.6 m
• Maximum flight altitude - 3.5 km
• Total range - 130 km
• Flight time ~ 2.5 h
• Empty UAV mass - 6.2 kg
• Payload mass - 1.5 kg
• Maximum takeoff mass - 11.3 kg
• Maximum speed - 30 m/sec
  I present an assembly 3D model of the Ukrainian UAV tactical reconnaissance of the battlefield.
  The model is made in life-size and in the configuration, the end of 2024.
  The set includes TWO assemblies of 3D model (with open and closed video camera),
  as well as, separately Video camera “Raptor x80 640G” - assembly 3D model. Unique development of 3D model - maximally detailed, reflecting in the model
  almost all external elements of the design, the camera feed mechanism is not a working copy
  of the original, but conveys the basic principles of the original design. All elements of the model,
  including markings are made in full 3D format and do not require the mandatory, additional use of special 2D textures.
  The model is ready for realistic 3D visualization in virtually any application designed for this purpose using a standard
  set of materials - all surfaces are ready for this and marked - Assigned materials surfaces with conditional color markings.
  See examples of realistic rendering in Keyshot 5.0 and Sketch fab. The model is technically accurate and is made as close as
  possible to the original and in the original dimensions, including the elements. Even the screw heads,
  rivets which are not filled with putty and sealant in the real product, correspond to real metric fasteners.
  Everything is made as accurately as possible, as much as possible relying on the little information from
  available open sources - photo and video materials. The model can be successfully used for detailed study
  of the external design of the product, creating realistic 3D visualizations of high quality and pixel resolution -
  much higher than 4K (smooth surfaces and high detail). As well as can be used for the production of high-quality
  stand models-models for training and for exhibition purposes. The model is assembled, all moving elements
  are made by separate parts, fan of Engine , swivel blades Attitude and position rudders, which if desired,
  allows you to use the model to create 3D animation. The model was originally developed in technical-engineering
  3D format (solid model CAD). In addition to solid model file formats, converted highly detailed polygonal
  file formats are additionally provided.
  Mesh:
  Vertices 917038
  Faces 1833984
  (gor.obj)
  Please rate and write a review about this model. If you have any questions, please message me.
  Always willing to consider your price offer.